On this page, you will find the direct link to download the Tecno f1 Factory Stock Rom Firmware (original firmware). The Stock ROM Package contains Driver, Flash Tool, and Manual.
if you are an experienced software repair engineer, you can go straight to the download button that is at the end of the post to so as to save time. However, if you new or upcoming technician you should consider reading the whole post so as to avoid unnecessary damage or bricks.
Why do you want to flash
phone flashing is the process of rewriting the firmware operating system on a device due to some problem that may have arisen during the process of using the device, some of this problem is as follows. forgotten security, malware commonly called virus effect which ranges from hanging on the logo, restarting, auto turn on internet connection, auto turn on WiFi connection, auto app installing. other may be just an upgrade of OS. Remember some problem can be easily solved by just factory reset
Important things to note
they are few important things to note before flashing any firmware so as to avoid bricks of the device. some are listed below
- Ensure you don’t flash the wrong preloader i.e try to know the build number and the variant of the firmware you are flashing. please read this post by hovatek team or that by romkingz.net.
- Ensure you have at least 30% to 50% battery charge so as to avoid half flash
- please ensure you backup your important file before flashing eg contact, sms and media file (phone, music, and videos)
Requirement before flashing for flashing Tecno f1 Factory firmware
- The device firmware
- The chipset flash tools (sp-flashtools or researchdownload)
- The chipset or device driver (learn how to install the driver here SPD and MTK)
- Good USB cable
- Your computer
Procedure for flashing Tecno F1 Pro
- Install WinrarSoftware in your Computer or Laptop, if already installed then ignore
- Download Tecno f1 pro Factory Firmware for flash file from the link provided below
- Extract to as you like path better is desktop for easy understanding
- Open SP Flash Tool folder and choose file and open it
- Choose Click Scatter-loading button and select txt file from the location
- Uncheck (unmark) “Preloader” only but If the device is dead then no need to uncheck Preloader click on Download button and Just Insert USB Cable to device
- If device dead or not detect then try with Volume UP button and Insert USB cable (Note: you can use Volume Down button also for detecting not working Up key)
- Wait until the finished process, do not try to unplug the device while in flashing mode
- Congrats you have successfully flash f1 Factory
You can also use other tools like WiseLink, SP Multiport Download, Miracle Box, Volcano, Infinity CMII etc to flash this device.
If you have null/invalid imei after flash, fix it using MTK engineering app, miracle box, maui meta 3g
please consider reading the full tutorial if this is not sufficient
To download the firmware that matches with your device, ensure you check the Build -Number
Read the Build-Number with miracle box
f1 pro Factory (F1-VP510EFG-GO-180804V3) firmware