Kata T MINI 2 Firmware / Stock Rom

Kata T MINI 2 Firmware / Stock Rom

Kata T MINI 2 Access Firmware or stock rom is the tested firmware for tablet. The Back up update is here, It will help you to fix software problem like, infected virusboot loophang upstuck on logo or other software related problem. Follow the easy instruction in flashing using SP Flashtool.

Important to read

Flashing new firmware will delete all your user data, including contacts, messages, photos and other third party installed apps where installed and saved in internal storage. Performing backup first is highly recommended. The following are the common software problem that can be fix through flashing new firmware;

  • Infected Virus – Also known as Monkey Virus where when you connect to Internet, there is automatically download apps or some popup screen and sometimes automatically turn on WiFi or data connection without doing it. The virus will not remove though hard reset or formatting your phone. Installing new firmware is the best solution.
  • Unfortunately Error – This is when you open some apps it will popup Unfortunately, App has stopped. If cannot fixed through clearing the data, then flashing new firmware is also the solution.
  • Stuck or Hang in Logo – The reason for this is either when you install incorrect Rom. Try to hard reset first but if still stuck, then flashing firmware is also the solution
  • Too Many Pattern Attempts or forgot password – This is just an alternative solution if you cannot hard reset your android phone.
  • Dead boot – Another caused of flashing incorrect ROM will lead to dead boot. Make sure you are flashing the right ROM (Firmware) for your Phone. If you think below is the right firmware for your device then nothing to worry.
  • Boot Loop – The device keep rebooting when you turned it on, Unless your power switch has been damage, Flashing new ROM will fix it.
  • And any software problem.

 

Download KATA T MINI 2 FIRMWARE

password: papa.rowell
Thanks and Credit to: Rowell_06

 

Guide Flash Rom Android Smartphone With ResearchDownload

Early steps to Install Stock ROM

  1. Download and Install Spreadtrum USB Driver on your Computer
  2. Download and Spreadtrum Upgrade Tool on your computer

How To Flash

  1. Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then Skip this Step.
  2. Download .pac firmware for your device (Itel, other)
  3. Download and extract Spreadtrum Upgrade Tool on your computer.
  4. Now, open UpgradeDownload.exe. Once Spreadtrum Upgrade Tool launched, connect your Android device to the computer (make sure your device is switcheded off).
  5. If Smartphone is securely attached to the computer, click on the Load Packed Button and add the .pac file (stock ROM which comes as .pac).
  6. Having successfully added the.Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
  7. During the flashing process,, your device will restart automatically.
  8. Once flashing completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
  9. Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool.
  10. Note after flashing phone on just 5 to 10 mins.
  11. During the flashing process,, your device will restart automatically. Once flashing completed, you will be able to see the Green Passed Message in SPD Upgrade Tool
  12. After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.

Guide Flash Rom Smartphone Android With SP Flash tools

Initial Steps to Install Firmware Kata T MINI 2 Firmware / Stock Rom

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool

How To Flash Kata T MINI 2 Firmware / Stock Rom

  1. First, you need to download and install SP flash tool
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/ROM for your phone
  4. Your phone must have 50 % charging before this process,
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SP flash tool.exe
  7. When SP flash tool open, go to download button in SP flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in SP flash tool
  12. Close SP flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.

Guide Flash Rom Smartphone Android With QPST Soft

Prerequisites for Installing Rom

How To Flash ROM

  1. Download and install QPST 2.7.422 with QFIL and Qualcomm USB Drivers.
  2. Turn off the phone. Hold Vol+ button and plug-in USB Cable. The phone will vibrate one time; the screen will be black. It’s Download Mode.
  3. There should be the device called in device management:
  4. Qualcomm HS-USB QDLoader 9008 (COMXX)
  5. In any other case, you have to install drivers manually.
  6. Run QFIL.
  7. Click Browse in Programmer Path and choose prog_emmc_firehose_8916.mbn
  8. Load XML in Download Section:
  9. First select RawProgram File: rawprogram0.xml
  10. then Select Patch File: patch0.xml
  11. Check all inputs is correct and click Download under Load XML button and wait about 5 to 10 minutes:
  12. After flashing process, starts, it might take up to 5-10 minutes. So, keep patience and wait.

Leave a Reply

Your email address will not be published. Required fields are marked *