Lenovo Phab 2 Plus PB2-670M MT6753 Firmware Flash File

By | June 29, 2017

Lenovo Phab 2 Plus PB2-670M MT6753 Firmware Flash File

Lenovo Phab 2 Plus PB2-670M MT6753 Firmware Flash File


Initial Steps to Install Firmware on Lenovo Phab 2 Plus PB2-670M

Download and install MTK  Android USB drivers

Download And Install SP Flash Tool

How To Flash Lenovo Phab 2 Plus PB2-670M

  1. First, you need to download and install sp flash tool
  2. Download and install MTK  Android USB drivers
  3. Then download Firmware file/Flash file/ROM for your phone
  4. Your phone must have 50 % charging before this process
  5. switch off your mobile remove the battery (if removable) reinsert the battery and plug the USB cable in charging socket
  6. Now open SPflash tool.exe
  7. When sp flash tool open, go to download button in sp flash tool
  8. In download tab, click on scatter load button
  9. After locating the scatter tab, click on the download button
  10. Now connect your smartphone with a USB cable and press volume up or volume down key for easy detection (remove and re-insert your phone battery if it is removable)
  11. Now flashing is completed, a green ring will appear in sp flash tool
  12. Close sp flash tool on your computer and unplug phone
  13. Power on the phone and enjoy
  14. After flashing process starts, it might take up to 5-10 minutes. So keep patience and wait.


*Important Notes*
Take a Backup of your rom before flashing or installing the firmware on your smartphone. As this helps you to recover your phone back whenever any thing wrong happens.

Leave a Reply

Your email address will not be published. Required fields are marked *